New Seat Brackets

As a part of our continuous improvement initiative, we have redesigned our front seat brackets. Two benefits of the new design include: Improved alignment of the seat – the upper bracket extends below the front seat-support tubes Increased durability – lower bracket can fully open (180°) without damage Opening the new bracket requires two tabs…

Raz ISO Compliance

Raz Design is the only North American manufacturer of mobile shower commode chairs that is registered with the International Standards Organization (ISO). We are committed to providing high-quality and safe products to our customer. As such, our products are subjected to an array of tests including: corrosion, flammability, strength and fatigue. When we are asked…

Custom Seat Order Forms

Because of the popularity of our custom seats, we have created a custom seat order form that will help therapists and dealers to better convey the seat specifications needed. To download a copy, click the link below or select the “Resources” tab in the main menu bar on main webpage.

Custom Tilt and Recline

Raz can custom design and fabricate chairs for very complex needs.   Shown Above: Customer-specified seat and back, tilt and recline ranges Extra-high back support Tilt and recline functions Custom removable thoracic lateral supports Adjustable-angle, 1-piece leg support Protective edges help prevent scratches and cuts to the leg rest upholstery Rear anti-tippers provide additional rearward…

Custom Limb Supports

One of the most common requests for custom work we receive is for modified or totally custom-fabricated foot and leg supports. These can range from unilateral or bilateral residual limb supports to full, bilateral leg platforms.   Shown Above: A swingaway / removable support. The pad dimensions can be custom specified. It comes equipped with…

Custom Base Frames

A common request for custom work we receive is for modified base frame. Modifications include extra tall, extra short, and extra wide frames to standard Raz chairs. Shown above: A Raz-SP600 with custom seat-to-floor height range (7” higher shown) with custom rear axle plate and custom longer caster stems. Raz-AT custom seat-to-floor height range (6″…

New Design for MFX Foot Support

In keeping with our commitment to constantly improve our products, we have redesigned the MFX-8 and MFX-12 footrests. The vertical hanger tube is ~2.5” shorter to eliminate interference with deeper seats that hang over the front of the seat frame. This change allows these footrests to be removed when used in combination with a deeper…

User-Actuated Directional Caster Locks

Now available on the Raz-SP (Self-Propel) are user-actuated front directional caster locks that improve stability by preventing the casters from swiveling during transfers. Ready access for the user is accomplished by the addition of rods that extend from seat level to the swivel lock mechanisms. Although all casters provided by Raz are dual-locking (swivel and…

Raz-AT1.5

We are pleased to announce the release of the newest version of the Raz-AT. The new “Raz-AT1.5” is an improvement over the original in several ways: Like the Raz-CAT, the seat frame is designed with better side access. The curved forward tubes of the seat frame offer less obstruction than the old straight tubes. The…

Wheelz

In a continuing effort to improve the function and aesthetics of our chairs, we have designed our own 22”, 24” and 24”HD wheels. The improvements are: The handrims are ergonomically contoured for more efficient propulsion and comfort. A thumb groove on the upper surface, combined with a wide lateral surface, provide superior performance. Molded “finger…